Hardware Specification |
Standard support |
IEEE802.11b/g IEEE 802.11n IEEE 802.3 10Base-T IEEE 802.3u 100Base-TX IEEE 802.3x Flow Control |
Chipset |
Ralink RT3050 |
Memory |
16 Mbytes DDR SDRAM 4 Mbytes Flash |
Interface |
Wireless IEEE 802.11b/g/n LAN: 1 x 10/100Base-TX, Auto-MDI/MDIX WAN: 1 x 10/100Base-TX, Auto-MDI/MDIX |
Antenna |
Internal (Default): 12dBi directional antenna (Vertical-Polarization) ■ Horizontal: 60 degree ■ Vertical: 30 degree External (Option): RP-SMA type Connector ■ Switchable by Software ■ For External Antenna Mode, attach antenna before power on |
Enclosure |
IP55 waterproof case |
PoE |
Passive PoE / 12V DC Reset Button on PoE Injector LAN RJ-45 Pin Assignment: PIN 4(+), PIN 7,8(-), PIN 5(Reset) |
Dimension (W x D x H) |
225 x 77 x 60 mm |
Weight |
255g |
Wireless Interface Specification |
Frequency Band |
2.4~2.4835GHz |
Modulation |
Transmission/Emission Type: DSSS / OFDM Data modulation type: OFDM with BPSK, QPSK, 16-QAM, 64-QAM, DBPSK, QPSK, CCK |
Data Rate |
802.11b: 11, 5.5, 2 and 1 Mbps with auto-rate fall back 802.11g: 54, 48, 36, 24, 18, 12, 9 and 6Mbps 802.11n (20MHz): up to 72Mbps 802.11n (40MHz): up to 150Mbps |
Opt. Channel |
America/ FCC: 2.414~2.462GHz (11 Channels) Europe/ ETSI: 2.412~2.472GHz (13 Channels) Japan/ TELEC: 2.412~2.484GHz (14 Channels) |
RF Output Power |
802.11b: 27 ± 1dBm 802.11g: 26 ± 1dBm 802.11n: 22 ± 1dBm |
Receiver Sensitivity |
802.11b: -93dBm 802.11g: -91dBm 802.11n: -89dBm |
Media Access Control |
CSMA/CA |
Output Power Control |
Range 1~100, default:100 |
Power Requirements |
12V DC, 1A (switching) |
Wireless Management Features |
Wireless Mode |
■ AP ■ Client ■ WDS PtP ■ WDS PtMP ■ WDS Repeater (AP+WDS) ■ Universal Repeater (AP+Client) |
Channel Width |
20MHz / 40MHz |
Encryption Security |
64/128-bits WEP WPA, WPA-PSK WPA2, WPA2-PSK 802.1X |
Wireless Isolation |
Able to isolate each connected wireless clients for independent access. |
Wireless Security |
Provides wireless LAN ACL (Access Control List) filtering Wireless MAC address filtering WPS (WIFI Protected Setup) Enable/Disable SSID Broadcast |
B/G Protection Mode |
A protection mechanism prevents collisions among 802.11b/g modes |
Max. Wireless Client |
25 |
Max. WDS AP |
4 |
Software |
LAN |
Built-in DHCP server supporting static IP address distributing Supports UPnP Supports IGMP Proxy, DNS Proxy Supports 802.1d STP - Spanning Tree Protocol |
WAN Protocol |
■ Static IP ■ DHCP (Dynamic IP) ■ PPPoE ■ PPTP ■ L2TP |
VPN Passthrough |
■ PPTP ■ L2TP ■ IPSec |
Operating Mode |
■ Bridge ■ Gateway ■ Ethernet Converter (WISP) |
Firewall |
NAT firewall with SPI (Stateful Packet Inspection) Built-in NAT server supporting Port Forwarding (Virtual Server), and DMZ Built-in firewall with Port / IP address / MAC / URL filtering |
Max. Wired Client |
60 |
NTP |
Network Time Management |
Management |
Web UI, DHCP Client, Configuration Backup & Restore, Dynamic DNS |
Diagnostic tool |
System Log |
Environment & Certification |
Operation |
Temp.: -20~70 Degree C Humidity: 10~95% non-condensing |
Storage |
Temp.: -30~80 Degree C Humidity: 5~95% non-condensing |
Regulatory |
CE / RoHS |