Hardware Specification |
10/100Base-TX Ports |
4 |
100Base-FX Port |
1 |
Fiber Port Type |
ISW-514PS:Multi-Mode ISW-514PS15:Single Mode ISW-514PSF:Vary on SFP |
Connector Type |
ISW-514PS:SC ISW-514PS15:SC ISW-514PSF:SFP |
Maximum Distance |
ISW-514PS:2km ISW-514PS15:15km ISW-514PSF:Vary on SFP |
Optical Frequency |
ISW-514PS:1300nm ISW-514PS15:1310nm ISW-514PSF:Vary on SFP |
Launch Power (dBm) |
ISW-514PS:Max.:-14 Min.:-20 ISW-514PS15:Max.: 0 Min.: -20 ISW-514PSF:Vary on SFP |
Receive Sensitivity (dBm) |
ISW-514PS:-32 ISW-514PS15:-32 ISW-514PSF:Vary on SFP |
IEEE 802.3af PoE Ports |
4 |
Dimension (D x W x H) |
135 x 87.8 x 56 mm |
Weight |
871g |
Power LED |
Power1, Power2 and Fault Port 1~4: PoE in-use, LNK/ACT Port 5: LNK/ACT |
Power Requirement |
24 or 48V DC, Redundant power with polarity reverse protection function |
Enclosure |
IP-30 aluminum metal case |
Protection |
ESD (Ethernet): 6KV DC Surge (Power): 6KV DC |
Installation |
DIN Rail kit and Wall Mount ear |
Alarm |
One relay output for power fail Alarm Relay current carry ability: 1A @ DC 24V |
Power over Ethernet |
PoE Standard |
IEEE 802.3af Power over Ethernet / PSE |
PoE Power Supply Type |
End-Span |
PoE Power Output |
Per Port 48V DC, 350mA . Max. 15.4 Watts |
Power Pin Assignment |
1/2(+), 3/6(-) |
Switch Specification |
Switch Processing Scheme |
Store-and-Forward |
Switch fabric |
1Gbps |
Throughput (packet per second) |
0.74Mpps@64bytes |
Address Table |
1K entries |
Maximum Frame Size |
1536 Bytes |
Pack Buffer |
512k bits |
Flow Control |
Back Pressure for Half Duplex IEEE 802.3x Pause Frame for Full Duplex |
Network cables |
• 10/100Base-TX: • 2-Pair UTP Cat. 3, 4, 5, 5e, 6 (100meters, max.) • EIA/TIA-568 100-ohm STP (100meters, max.) • 100Base-FX: • Multi-Mode optic fiber 62.5/125μm or 50/125μm • Single-Mode optic fiber 9/125μm |
Layer 2 Function |
Management |
Web management, SNMP Trap |
VLAN |
• Port-Based VLAN • IEEE 802.1Q Tag-Based VLAN, Up to 16 VLAN groups |
QoS |
2 priority queues for three type of Class of Service • Port-Based • IEEE 802.1p priority tag • TCP/IP header’s DSCP classifier Weighted Round Robin queue scheduling |
Bandwidth Control |
Inbound Rate Limit and Outbound Traffic shaping |
Storm Control |
Disable, 12.5%, 25%, 50%, 62.5% 4 levels |
Security |
Supports 5 IP addresses that have permission to access the Switch |
Standards Conformance |
Regulation Compliance |
FCC Part 15 Class A, CE |
Stability Testing |
IEC60068-2-32 (Free Fall) IEC60068-2-27 (Shock) IEC60068-2-6 (Vibration) |
Standard Compliance |
IEEE 802.3 Ethernet IEEE 802.3u Fast Ethernet IEEE 802.3x Flow Control IEEE 802.3af Power over Ethernet IEEE 802.1p Class of Service IEEE 802.1Q VLAN Tagging |
Environment |
Temperature |
Operating: -10~60 Degree C Storage: -40~85 Degree C |
Humidity |
Operating: 5~90% Storage: 5~90% (Non-condensing) |