802.11n Enterprise PoE Access Point
Overview
PLANET WNAP-3000PE is an Enterprise PoE access point with advanced management features, superior encryption standard but been cost effective. The built-in IEEE802.11n 3 Tx (Transmit chains) / 3 Rx (Receive chains) MIMO technology enables the data rate up to 300Mbps and is compatible with IEEE 802.11b/g devices.
Emphasizing on the enterprise demand, the WNAP-3000PE enhances security and management features including multiple SSID, IEEE 802.1Q VLAN support, WPA support, RADIUS MAC authentication, rogue AP detection and etc. The WNAP-3000PE provides one 1000Mbps-Giga LAN port compliant with 802.3af PoE standard, therefore it can be installed anywhere without the constraint of power socket by just connecting with PLANET PoE Switch that supplies both power and data to it via the RJ-45 cable. Provided multiple reversed-polarity SMA male antenna connectors, the WNAP-3000PE is allowed to connect the suitable external antenna and booster for right wireless environment such as in warehouse, campus or enterprises. |
|
|
Application
Secured and Managed Enterprise-class WLAN With support for high-level encryption mechanism, the WNAP-3000PE can effectively prevent your information from eavesdropping by unauthorized users. Allowing multiple different SSIDs to be used simultaneously and cooperating with the VLAN support, the WNAP-3000PE helps network administrators define seperated wireless subnets for various Class-of-service and security policies. |
|
|
Key Features
• IEEE 802.11n draft 2.0 compliant with IEEE 802.11b/g • Supports PoE port (IEEE 802.3af compliant) • Strong network security with WEP, WPA(PSK), 802.1x authentication • With 3 detachable RP-SMA connectors for expanding of external antenna connection distance • High data transfer rate up to 300Mbps • Five operation modes selectable: AP / AP Client / Wireless Bridge / Multiple Bridge / Repeater • Adjustable output power level • Supports Multiple SSID, Multiple SSID isolation, 802.1Q VLAN, RADIUS MAC authentication, Rogue AP detection, Access Control • Windows-base utility, Web, and CLI (Command Line Interface) Configuration • SNMP v1, v2, v3 supported |
|
Specification
Product |
Standard |
IEEE 802.11b/g, IEEE 802.11n draft 2.0 |
Modulation |
OFDM / CCK/ DQPSK / DBPSK |
Port |
10/100/1000Base-T (RJ-45) PoE port, 802.3af compliant |
Antenna |
Detachable 2dBi Dipole Antenna * 3 |
Output Power (max.) |
For FCC: 3T x For FCC: MAX: 22.5 dBm @11B mode MAX: 20.5 dBm @11G mode MAX: 22.5dBm @11N mode
For ETSI: 3T x For ETSI : MAX: 18.5dBm @11B/G/N mode |
Sensitivity |
11b: 11Mbps@ - 88dBm 11g: 54Mbps@ - 73dBm 11n: 300Mbps@ -69dBm |
Operating Mode |
AP, AP Client, Wireless Bridge, Multiple Bridge, Repeater |
Security |
WEP, WPA, and WPA-PSK authentication 802.1x support EAP-MD5, EAP-TLS, EAP-TTLS, PEAP RADIUS based MAC authentication Block inter-wireless station communication (wireless separation) Block SSID broadcast |
Wireless Advanced |
Supports Wireless Roaming (Mobility Feature) |
Management |
Web based configuration RADIUS Accounting RADIUS-On feature RADIUS Accounting update Telnet / CLI Syslog / internal Log Access Control list file support Configuration file Backup / Restore Statistics support LLTD |
|
Download
Datasheet
Date |
Version |
Description |
Download |
2010-03-17 |
1.0 |
WNAP-3000PE |
|
Firmware
Quick Guide
Date |
Version |
Description |
Download |
2010-03-17 |
1.1 |
Initial release |
|
User's Manual
Date |
Version |
Description |
Download |
2010-03-17 |
1.1 |
Initial release |
|
EC Declaration
Date |
Version |
Description |
Download |
2010-03-17 |
1.0 |
Initial Release |
|
|
|