IEEE 802.3af/at to Passive PoE Power Converter (12V/19V/24V)
Overview
Simplify Internet Usage with Passive PoE Converter
PLANET POE-165S IEEE 802.3af/at to Passive PoE Converter convert a standard IEEE 802.3af/at PoE input powered device to 12V/19V/24V passive PoE power output device, designed to solve the issue of the difficulty in finding power outlets in outdoor places. Being able to operate under wide temperature range from -40 to 75 degrees C, the POE-165S can be placed in almost any difficult environment. The POE-165S is suitable for either DIN rail or wall mounting for the efficient use of cabinet space. |
| |
|
|
| |
Innovative Selectable DC Power Output Voltage
Via the innovative 12/19/24 volt DIP switch, the POE-165S can supply 12V/19V/24V DC power to the network devices, such as outdoor wireless access point. It highly increases the flexibility of the product applications. |
| |
|
|
| |
Easy Centralized Power Management
As the POE-165S can obtain power from IEEE 802.3af/at PoE switch/injector and supply the power to the remote device by passive PoE port, network administrator can remotely power off/on the remote device by the managed PoE switch/injector through the POE-165S.
Plug and Play, Easy Cabling Installation
With IEEE 802.3af/at Gigabit Power over Ethernet devices installed, the system administrator only has to use one single RJ-45 Ethernet cable to transmit both power and data to each device. Besides, by connecting the Industrial High Power PoE Injector with the POE-165S, you can also have the benefits of cost saving, easy networking planning and high network reliability. |
| |
|
| Ordering Information |
| POE-165S |
IEEE 802.3af/at Passive PoE Converter (12V/19V/24V) |
Application
IEEE 802.3af/at Passive PoE Power Converter Installation:
Due to the capability of IEEE 802.3af/at standard, the POE-165S can co-work with the IEEE 802.3af/at Gigabit PoE injector devices. The POE-165S has three optional outputs (12V/19V/24V DC) for non-PoE devices, such as multi-channel wireless LAN access points and other network devices. |
| |
|
|
| |
|
| Ordering Information |
| POE-165S |
IEEE 802.3af/at Passive PoE Converter (12V/19V/24V) |
Key Features
Interface
- 2-Port 10/100/1000Mbps RJ-45 interfaces
- 1-Port Data + Power output- 1-Port Data + 802.3af/at Power inputStandard Power over Ethernet Input Port
- Complies with IEEE 802.3af/at Power over Ethernet PD
Passive Power over Ethernet Output Port
- Non-IEEE 802.3af/at injector port
- 1 DC 12V/19V/24V DIP switch
- Power Output Pin: 4/5(+), 7/8(-)
Hardware
- Metal case
- LED indicators for PoE-In LED and 12V/19V/24V Output Voltage LED
Standard Compliance
- IEEE 802.3 10Base-T
- IEEE 802.3u 100Base-TX
- IEEE 802.3ab 1000Base-T
- IEEE 802.3at High Power over Ethernet
- IEEE 802.3af Power over Ethernet
- FCC Part 15 Class A, CE
|
| |
|
| Ordering Information |
| POE-165S |
IEEE 802.3af/at Passive PoE Converter (12V/19V/24V) |
Specification
| Hardware Specification |
| Interface |
PoE In Port: 1 x IEEE 802.3af/at RJ-45 STP / PD
Passive PoE Out Port: 1 x non-802.3af/at RJ-45 STP / PSE |
| LED Indicator |
System
● PoE In (Green)
Passive PoE Out
● 12V (Green)
● 19V (Green)
● 24V (Green) |
| Network Cable |
10Base-T: 2-Pair UTP Cat. 3, 4, 5
100Base-TX: 2-Pair UTP Cat. 3, 4, 5
1000Base-T: 2-Pair UTP Cat. 5, 5e, 6
EIA/TIA-568 100-ohm STP |
| DIP Switch |
12V/19V/24V DC Output Voltage |
| Power Input |
IEEE 802.3af/at Power over Ethernet End-Span / Mid-Span Class 4 PD |
| Power Output |
Maximum Passive PoE
12V DC, 0.7A
19V DC, 0.7A
24V DC, 0.7A |
| Power Output Pin Assignment |
4/5(+), 7/8(-) |
| Data Rate |
10/100/1000Mbps |
| Maximum Distance |
Up to 100meters (Including POE-165S) |
| Dimensions (W x D x H) |
94 x 70.3 x 26.2 mm |
| Weight |
182g |
| Number of devices that can be powered |
1 |
| Operating Temperature |
-40 ~ 75 degrees C |
| Storage Temperature |
-40 ~ 85 degrees C |
| Operating Humidity |
5 ~ 90%, Relative Humidity, non-condensing |
| Storage Humidity |
5 ~ 90%, Relative Humidity, non-condensing |
| Compliant PLANET Outdoor Wireless Devices |
| 2.4GHz |
WNAP-6306 (v2) @ 12V |
| 5GHz |
WNAP-7206 @ 12V
WNAP-7300 @ 19V/24V
WNAP-7320 @ 12V/19V/24V |
| Standards Conformance |
| Standards Compliance |
IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-TX Fast Ethernet
IEEE 802.3ab 1000Base-T Gigabit Ethernet
IEEE 802.3at High Power over Ethernet
IEEE 802.3af Power over Ethernet |
| Regulation Compliance |
FCC Part 15 Class A, CE |
|
| Ordering Information |
| POE-165S |
IEEE 802.3af/at Passive PoE Converter (12V/19V/24V) |
Download
Datasheet
| Date |
Version |
Description |
Download |
| 2013-07-19 |
1.0 |
POE-165S |
 |
User's Manual
| Date |
Version |
Description |
Download |
| 2013-07-05 |
1.0 |
Initial release. |
|
|
|
| Ordering Information |
| POE-165S |
IEEE 802.3af/at Passive PoE Converter (12V/19V/24V) |
