PoE over Coaxial Extender-Transmitter
Overview
PLANET VC-203Px series of PoE over Coaxial Extender is designed to extend IP Ethernet transmission and inject power over an existing coaxial cable for distance up to 1000m (3280ft) to PoE IP camera, PoE Wireless AP and any 802.3af/at complied powered device (PD).
The VC-203Px consists of a Transmitter and Receiver set which can work in pair without any power adapter and anywhere on your network infrastructure. The solution contains two brand-new products:
■ VC-203PT: 1-Port 10/100TX PoE PD + 1-Port BNC PoE over Coaxial PSE Extender – Transmitter
■ VC-203PR: 1-Port 10/100TX PoE PSE + 1-Port BNC PoE over Coaxial PD Extender – Receiver |
| |
|
|
| |
|
Models
|
VC-203PT
|
VC-203PR
|
|
Power over Coax. Extender
|
Transmitter
|
Receiver
|
|
Power Input
(Optional)
|
PoE
|
RJ-45: 802.3af/at PoE In
UTP cable, up to 100m
|
BNC: PoE over Coaxial In
Coaxial cable, up to 1km
|
|
DC
|
DC Jack: 52~56V DC In
|
DC Jack: 52~56V DC In
|
|
Power Output
|
PoE
|
BNC: Power over Coaxial Out
Coaxial cable, up to 1km
|
RJ-45: 802.3af/at PoE out
UTP cable, up to 100m
|
|
DC
|
--
|
2-Pin Terminal Block :
Selectable 12V/24V DC
|
It is a perfect solution for sending IP Video links and power to remote PoE IP camera installation that are beyond the 100 meters distance limit of Ethernet. |
| |
Power over Coaxial
Based on IEEE 802.3at High Power over Ethernet and up to 25 watts of power output, PLANET PoE over coaxial extender solution eliminates the need for additional remote site power while allowing a single PoE source, such as a PoE network switch, to provide power to both transceivers and the camera at long range. This feature eliminates the need for local and remote site power supplies.
Stable Operating Performance under Difficult Environments
The VC-203PT and VC-203PR extenders are one perfect combined solution for extending data and power transmissions over long distances for places like warehouses, parking lots, campuses, casinos, and many more. They can operate stably under temperature range from -40 to 75 degrees C which enables the users to conveniently apply the device in almost any location of the network. |
| |
|
| Ordering Information |
| VC-203PT |
1-Port 10/100TX PoE PD + 1-Port BNC PoE over Coaxial PSE Extender – Transmitter |
Application
Applications of VC-203PT and VC-203PR
The VC-203PT, which functions with the VC-203PR can split into four different kinds of combinations. The VC-203PT can power by either from external DC power adapter or high power PoE switch. The power output of the VC-203PR is selectable - PoE output to the PoE Power Devices (PD) OR DC power output to the Non-PoE Devices.
Type 1 – VC-203PT with 52~56V power adapter and VC-203PR with PoE power output
| |
CPE
|
CO
|
|
VC-203PT
|
VC-203PR
|
|
Power Input
|
Power adapter with 52~56V DC in
|
BNC with DC power over coaxial input
|
|
Power Output
|
BNC with DC power over coaxial output
|
RJ-45 with 802.3at/af PoE output
|
|
| |
|
|
| |
Type 2 – VC-203PT with 52~56V power adapter and VC-203PR with DC power output
| |
CPE
|
CO
|
|
VC-203PT
|
VC-203PR
|
|
Power Input
|
Power adapter with 52~56V DC in
|
BNC with DC power over coaxial input
|
|
Power Output
|
BNC with DC power over coaxial output
|
DC Terminal block with 12V or 24V DC output
|
|
| |
|
|
| |
Type 3 – VC-203PT with PoE power input and VC-203PR with PoE power output
| |
CPE
|
CO
|
|
VC-203PT
|
VC-203PR
|
|
Power Input
|
RJ-45 with 802.3at/af PoE input
|
BNC with DC power over coaxial input
|
|
Power Output
|
BNC with DC power over coaxial output
|
RJ-45 with 802.3at/af PoE output
|
|
| |
|
|
| |
Type 4 – VC-203PT with PoE power input and VC-203PR with DC power output
| |
CPE
|
CO
|
|
VC-203PT
|
VC-203PR
|
|
Power Input
|
RJ-45 with 802.3at/af PoE input
|
BNC with DC power over coaxial input
|
|
Power Output
|
BNC with DC power over coaxial output
|
DC Terminal block with 12V or 24V DC output
|
|
| |
|
|
| |
|
| Ordering Information |
| VC-203PT |
1-Port 10/100TX PoE PD + 1-Port BNC PoE over Coaxial PSE Extender – Transmitter |
Key Features
Physical Port
- 1 x 10/100Base-TX RJ-45 copper interface (PoE IN)
- 1 x BNC connector (Power and data transmitter)
Power over Ethernet
- Eliminates Power cabling with PoE over Coaxial
- Ethernet over coaxial up to 1km with 5C2V/RG6 75Ωcable
- Complies with IEEE 802.3af / IEEE 802.3at Power over Ethernet on RJ-45 port
- Supports PoE Power up to 30.8 watts (Varying with Power Source and Coaxial Distance)
Layer 2 Features
- Supports auto-negotiation and 10/100Mbps half / full duplex
- Prevents packet loss with back pressure (half duplex) and IEEE 802.3x pause frame flow control (full duplex)
VDSL2 Features
- One box design, Master / Slave selectable via DIP Switch
- Defines asymmetric (Band Plan 998) and symmetric band plans for the transmission of upstream and downstream signals
Industrial Case / Installation
- Supports extensive LED indicators for network diagnostics
- IP30 metal case protection
- Flexible power source either extemal DC or PoE power input
- Supports EFT protection 2000 VDC for power line
- Supports 2000 VDC Ethernet ESD protection
- -40 to 75 degrees C operating temperature
|
| |
|
| Ordering Information |
| VC-203PT |
1-Port 10/100TX PoE PD + 1-Port BNC PoE over Coaxial PSE Extender – Transmitter |
Specification
| Hardware Specifications |
| Interface |
Copper:
10/100Base-TX RJ-45
Auto-negotiation/auto-MDI/MDI-X
802.3at/af PoE Input
Coaxial:
BNC, female
Power over Coaxial output
DC Socket(Optional):
52~56V DC input
DIP-Switch:
2-position DIP Switch
■ Selectable CO or CPE mode
(Default: CPE)
■ Selectable Band plan: asymmetric or symmetric
(Default: asymmetric) |
| LED Indicators |
| LED is Green in Color: |
| System: |
PoE: |
| |
■ PWR |
|
■ PoE IN |
| VDSL2: |
Ethernet: |
| |
■ LNK |
|
■ LNK/ACT |
| |
■ CO |
|
■ 100 |
| |
■ CPE |
|
|
|
| ESD Protection |
2KV DC |
| EFT Protection |
2KV DC |
| Enclosure |
IP30 metal case |
| Installation |
Wall mount or DIN rail with optional kit |
| Dimensions (W x D x H) |
94 x 70.3x 39.2 mm |
| Weight |
288g |
| Power Requirements |
■ RJ-45 PoE Input: 802.3at/af 44~57V DC
■ DC Input: 52~56V DC |
| Power over Ethernet/Coaxial |
| PoE Standard |
IEEE 802.3at Type 2
IEEE 802.3af |
| PSE Interface |
BNC
44~57V DC
(Depending on what the DC/PoE Power Input is) |
| PD Interface |
RJ-45, both Mid-Span and End-Span
Input Range: 44~57V DC |
| DC Power Output |
- |
| Max. PoE Budget |
Power Input by PoE
BNC : 25 watts
Power Input by DC
BNC : 30 watts |
Performance*
(Downstream / Upstream)** |
|
Distance
|
Data Rate
|
VC-203PR PoE Output
|
|
Asymmetric Mode
|
Symmetric Mode
|
VC-203PT
W/DC IN
|
VC-203PT
W/PoE+ IN
|
|
200m
|
100/60 Mbps
|
90/100 Mbps
|
20W
|
13W
|
|
400m
|
95/55 Mbps
|
85/100 Mbps
|
16W
|
11W
|
|
600m
|
90/50 Mbps
|
70/80 Mbps
|
12W
|
10W
|
|
800m
|
85/45 Mbps
|
65/70 Mbps
|
7W
|
6W
|
|
1000m
|
70/35 Mbps
|
55/55 Mbps
|
5W
|
4W
|
|
1200m
|
60/25 Mbps
|
45/40 Mbps
|
-
|
-
|
|
| Standards Conformance |
| Standards Compliance |
IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-TX Fast Ethernet
IEEE 802.3af Power over Ethernet (802.3at Type 1)
IEEE 802.3at Power over Ethernet (802.3at Type 2) |
| Regulation Compliance |
FCC Part 15 Class A, CE |
| Environment |
| Temperature |
| Operating: |
-40 ~ 75 degree C |
| Storage: |
-40 ~ 75 degrees C |
|
| Humidity |
| Operating: |
5 ~ 95% (non-condensing) |
| Storage: |
5 ~ 95% (non-condensing) |
|
| * The actual data rate will vary on the quality of the copper wire and environment factors. |
| ** Default Downstream VC-203PR to VC-203PT ; Upstream VC-203PT to VC-203PR. |
|
| Ordering Information |
| VC-203PT |
1-Port 10/100TX PoE PD + 1-Port BNC PoE over Coaxial PSE Extender – Transmitter |
Download
Datasheet
| Date |
Version |
Description |
Download |
| 2013-07-26 |
1.0 |
VC-203PT |
 |
User's Manual
| Date |
Version |
Description |
Download |
| 2013-07-08 |
1.0 |
Initial release. |
|
EC Declaration
| Date |
Version |
Description |
Download |
| 2013-08-27 |
1.0 |
Initial release. |
|
|
|
| Ordering Information |
| VC-203PT |
1-Port 10/100TX PoE PD + 1-Port BNC PoE over Coaxial PSE Extender – Transmitter |
