VF-402-KIT 
4-Channel Video over Fiber Bundle Kit
Overview
Reliable Long Distance Solution for Analog Surveillance System
To help current analog camera deployment in long distances efficiently and provide high video quality and reliable signal, PLANET develops the Video over Fiber media converter kit, VF-402-KIT, which is ideal for extending the distance and signal conversion by transmitting the Video and data over the fiber-optic cable. Applies the intelligent encoding / decoding technology in the compact size mini box, the CCTV over Fiber media converter VF-402-KIT enables the videos to be delivered in high quality up to 20km long distance. |
| |
|
|
| |
Fiber Optic Communication for Video and Serial Data
The VF-402-KIT consists of a Video Transmitter and a Video Receiver:
• VF-402-T: 4-Channel Video over Fiber Transmitter
• VF-402-R: 4-Channel Video over Fiber Receiver
It is a digital fiber-optic transmission system to bring users a cost-effective solution for transmission of 4 channels uncompressed digital video and 1 reverse RS-485 async-data over one single fiber cable. The VF-402-KIT is an adjustment free device while providing high quality and real-time video transmission. It can be widely used in Intelligent Transportation Systems (ITS), Traffic Surveillance, security monitoring, automation control, intelligent residential districts and etc. |
| |
|
|
| |
|
|
| |
Industrial Level Monitoring Systems
The VF-402-KIT can be applied to Industrial level operation under wide temperature range -25 to 75 Degree C. It performs zero distortion of high quality video transmission and clear graphics in long distance by adopting advanced international uncompressed full digital error correction and gigabit fiber optical transmission technology. This series of optical transceiver supports hot plug and can be deployed independently or in rack-mounted structure. It is simple to operate without requiring field adjustment. Therefore, the VF-402-KIT is very applicable to different working environments. |
| |
|
|
| |
|
| Ordering Information |
| VF-402-KIT |
4-Channel Video over Fiber Bundle Kit (VF-402-T + VF-402-R) |
Application
| The VF-402-KIT consists of 4 channels video over fiber optical transceiver and receiver to transmit video andRS-485 signal through a reliable single mode / single fiber link. It is an ideal cost-effective solution for surveillance system that requires high display quality and high performance signal transmission over long distances. The VF-402-KIT features easy plug and play; that means the operator does not need to configure the pair of the video over fiber transmission in advance. |
| |
|
|
| |
Typical Applications
• Intelligent Transportation Systems (ITS)
• Toll Collection
• Traffic Surveillance
• Air Traffic Management (ATM)
• Rail Signaling
• Perimeter Alarms and Area Monitors
• Telemedicine and Teleconference
• Industrial Surveillance
• Intelligent Building
• CCTV network |
| |
|
| Ordering Information |
| VF-402-KIT |
4-Channel Video over Fiber Bundle Kit (VF-402-T + VF-402-R) |
Key Features
• High-Speed synchronous digital transmission up to 20km
• Fiber optic transmission of four video signals on one fiber with RS-485 data signals
• Friendly status indication for power supply, optical signal and video
• No electromagnetic interference, radio frequency interference and ground current
• Guarantees safe transmission under poor electromagnetic environment
• Maximum tolerable link loss for single mode single fiber is 18db
• Video bandwidth of 6.5 MHz, SNR > 63dB
• Industrial level of operating under wide temperature range -25 to 75 Degree C |
| |
|
| Ordering Information |
| VF-402-KIT |
4-Channel Video over Fiber Bundle Kit (VF-402-T + VF-402-R) |
Specification
| Video Characteristic |
| Video Channel |
4 channel Bi-direction |
| Video Connector |
BNC |
| Video Input / Output Impedance |
75ohm / unbalanced interface |
| Video Input / Output Voltage |
1.0 Vpp / Typical peak-peak value |
| Video Bandwidth |
5Hz to 6.5MHz |
| Video Digital Bit Width |
8/10 bit |
| Differential Gain(DG) |
<1.3% (Typical Value) |
| Differential Phase(DP) |
<1.3° (Typical Value) |
| SNR Weighted |
>63dB (Typical Value) |
| Data Interface |
| Data Channel |
4 channel |
| Physical Protocol |
RS-485 |
| Operation Mode |
Simplex |
| Data Connector |
4 Pin terminal block with screw clamps |
| Data Rate |
DC-150 Kbps |
| Data Distance |
RS-485: 0-20KM |
| BPS |
0-115.2Kbps |
| Bit Error Rate (BER) |
< 10-9 |
| Optical Interface |
| Optical Connector |
FC |
| Fiber Type |
Single-mode, single fiber |
| Distance |
20km for single mode |
| Optical Wavelength |
VF-402-T:TX: 1310nm, RX: 1550nm
VF-402-R:TX: 1550nm, RX: 1310nm |
| Transmitter couple power |
Max. : 4dBM, Min. : -4dBM |
| Receive Sensitivity |
-26dBm |
| Link budget |
From 22dB to 30dB at 1310nm or 1550nm |
| Cable |
9/125μm single-mode cable |
| Hardware Specification |
| LED Indicators |
• One Power
• One for Video
- Green, Link
• One for Fiber Optic
- Green, Link
|
| Dimension (W x D x H) |
110 x 174 x 47 mm |
| Weight |
560g |
| Power Requirement |
DC 5V / 2A, AC 90~264V, 50~60HZ |
| Chassis Current Consumption |
0.75Amp for 4 channel video and 1 channel data |
| Mechanical |
Metal |
| Standards Conformance |
| Regulation Compliance |
FCC Part 15 Class A, CE |
| Environment |
| Operating |
Temperature: -25 ~ 75 Degree C
Relative Humidity: 0 ~ 95% (non-condensing) |
| Storage |
Temperature: -40 ~ 85 Degree C
Relative Humidity: 5 ~ 95% (non-condensing) |
|
| Ordering Information |
| VF-402-KIT |
4-Channel Video over Fiber Bundle Kit (VF-402-T + VF-402-R) |
Download
Datasheet
| Date |
Version |
Description |
Download |
| 2012-11-23 |
1.0 |
VF-402-KIT |
 |
User's Manual
| Date |
Version |
Description |
Download |
| 2012-10-05 |
1.0 |
Initial Release |
|
|
|
| Ordering Information |
| VF-402-KIT |
4-Channel Video over Fiber Bundle Kit (VF-402-T + VF-402-R) |
