8-Port 10/100/1000T 802.3at PoE + 2-Port 10/100/1000T Desktop Switch (120 watts)
Overview
Flexible, Extendable and Centralized Power Distribution
PLANET GSD-1008HP provides eight 10/100/1000T ports featuring 30-watt 802.3at PoE+, a total 120-watt PoE budget and extra two uplink ports to fulfill the demand of sufficient PoE power for HD IP surveillance and Wi-Fi system in a small-scale but high-performance network. With the same desktop-sized and compact metal housing, it makes the placement of the unit convenient and provides a quick and easy PoE PDs deployment with power feeding. |
| |
|
|
| |
Ethernet Data Transmit Distance Extension
The built-in solid DIP switch provides "Standard", "VLAN" and "Extend" operation modes. The GSD-1008HP operates as a normal IEEE 802.3at PoE+ switch in the "Standard" operation mode.
The "VLAN" operation mode features with port-based VLAN function that helps to prevent the IP camera’s multicast or broadcast storm from influencing each other.
In the “Extend” operation mode, the GSD-1008HP operates on a per-port basis at 10Mbps duplex operation but supports 30-watt PoE power output over a distance of up to 250 meters overcoming the 100m limit on Ethernet UTP cable. With this brand-new feature, the GSD-1008HP provides an additional solution for 802.3at PoE+ distance extension, thus saving the cost of Ethernet cable installation. Furthermore, its VLAN isolation function isolates each port so as to prevent broadcast storm and defend DHCP spoofing in the “Extend” operation mode. |
| |
|
|
| |
Two Gigabit Uplink Ports
The GSD-1008HP comes with two uplink ports with 1000Mbps transfer rate to ensure high-speed data and video transmission, reliable assurance for connection between the surveillance system and outside network where the eight PoE+ ports can be used to their full potential. |
| |
Stable and High Performance Switch Architecture
The GSD-1008HP has an 8K MAC address table, featuring high performance switch architecture capable of providing the non-blocking 20Gbps switch fabric and wire-speed throughput as high as 14.88Mpps, which greatly simplifies the tasks of upgrading the LAN for catering to increasing bandwidth demands. Besides, the 802.3x full-duplex flow control function of the GSD-1008HP enables PD devices and servers to be directly connected to the switch for wire-speed packet transfer performance without the risk of packet loss |
| |
Easy Cable Connection
With data switching and power over Ethernet integrated into one unit, the GSD-1008HP reduces cabling requirements and eliminates the need for dedicated electrical outlets on the wall, ceiling or any unreachable place. A wire that carries both data and power can lower the installation costs, simplify the installation effort and eliminate the need for electricians or extension cords. With 8 PoE interfaces, the GSD-1008HP is ideal for small businesses and workgroups making the deployment of the PoE facility including wireless access points, IP-based surveillance camera and IP phones in any places easier, more efficient and more cost-effective. |
| |
|
|
| |
|
| Ordering Information |
| GSD-1008HP |
8-Port 10/100/1000T 802.3at PoE + 2-Port 10/100/1000T Desktop Switch (120 watts) |
Application
Department/Workgroup PoE Switch
Providing eight 802.3at PoE+ in-line power interfaces, the GSD-1008HP can easily build a power source that centrally controls the enterprises’ IP phone systems, IP camera systems and wireless AP systems. For instance, up to 8 cameras can be installed atthe corners in the company for surveillance demands or up to 8 wireless APs can be built to have a wireless roaming environment in the office. Without the power-socket limitation, the GSD-1008HP makes the installation of cameras or wireless APs easier and more efficient. |
| |
|
|
| |
|
|
| |
|
| Ordering Information |
| GSD-1008HP |
8-Port 10/100/1000T 802.3at PoE + 2-Port 10/100/1000T Desktop Switch (120 watts) |
Key Features
Physical Port
- 10-port 10/100/1000BASE-T Gigabit Ethernet RJ45 copper
- 8-port IEEE 802.3at PoE+ Injector (Port-1 to Port-8)
Power over Ethernet
- Complies with IEEE 802.3at Power+ over Ethernet end-span PSE
- Up to 8 ports of IEEE 802.3af/802.3at devices powered
- Supports PoE power up to 30.8 watts for each PoE port
- Each port supports 55V DC power to PoE powered device
- 120-watt PoE budget
- Auto detects powered device (PD)
- Circuit protection prevents power interference between ports
- Remote power feeding up to 100m in standard mode with 250m in extended mode
Switching
- Hardware-based 10/100/1000Mbps auto-negotiation and auto MDI/MDI-X
- Flow control for full duplex operation and back pressure for half duplex operation
- IEEE 802.1Q VLAN transparency
- Hardware DIP switch for Standard, VLAN and Extend mode selection; the Extend mode features 30-watt PoE transmit distance of 250m at speed of 10Mbps and VLAN isolation (Only for Port-1 to Port-8)
- Solid DIP switch to isolate ports to prevent broadcast storm and defend DHCP spoofing
Hardware
- 9-inch desktop size, 1U height, rack mountable
- LED indicators for system power, per port PoE ready and PoE activity, speed, Link/Act
- Supports Energy-Efficient Ethernet (EEE) function (IEEE 802.3az)
|
| |
|
| Ordering Information |
| GSD-1008HP |
8-Port 10/100/1000T 802.3at PoE + 2-Port 10/100/1000T Desktop Switch (120 watts) |
Specification
| Hardware Specifications |
| Copper Port |
10 10/100/1000BASE-T MDI/MDIX Ports |
| PoE Injector Port |
8-port with 802.3at/af PoE injector function with Port-1 to Port-8 |
| Switch Architecture |
Store-and-Forward |
| Switch Fabric |
20Gbps/non-blocking |
| Switch Throughput@64 bytes |
14.88Mpps@64 bytes |
| MAC Address Table |
8K entries, automatic source address learning and aging |
| Maximum Frame Size |
9K bytes |
| Flow Control |
IEEE 802.3x pause frame for full-duplex
Back pressure for half-duplex |
| LED |
System:
10/100/1000BASE-T RJ45 interfaces:
- 10/100Mbps LNK/ACT (Red)
- 1000Mbps LNK/ACT (Green)
PoE interfaces:
|
| DIP Switch |
Selectable operation mode
|
| Dimensions (W x D x H) |
220 x 150 x 43 mm (1U height) |
| Enclosure |
Metal |
| Weight |
1260 g |
| Power Requirements |
AC 100~240V, 50/60Hz, 2.5A max. |
| Power Consumption/ Dissipation |
System On: Max. 5.6 watts/19.1 BTU
Ethernet Full Loading: Max 10.6 watts/36.1 BTU
PoE Full Loading: Max. 139 watts/474.2 BTU |
| ESD Protection |
Contact discharge of 4KV DC
Air discharge of 6KV DC |
| Thermal Fan |
1 |
| Power over Ethernet |
| PoE Standard |
IEEE 802.3af Power over Ethernet/PSE
IEEE 802.3at Power over Ethernet Plus/PSE |
| PoE Power Supply Type |
End-span |
| PoE Power Output |
Per port 55V DC, 540mA. max. 30 watts |
| Power Pin Assignment |
1/2(+), 3/6(-) |
| PoE Power Budget |
120 watts |
| Max. Number of Class 2 PDs |
8 |
| Max. Number of Class 3 PDs |
8 |
| Max. Number of Class 4 PDs |
4 |
| Standards Conformance |
| Regulatory Compliance |
FCC Part 15 Class A, CE |
| Standards Compliance |
IEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX
IEEE 802.3ab Gigabit 1000BASE-T
IEEE 802.3x Flow control and back pressure
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet Plus
IEEE 802.3az Energy Efficient Ethernet (EEE) |
| Environment |
| Operating |
Temperature: 0 ~ 50 degrees C
Relative Humidity: 5 ~ 95% (non-condensing) |
| Storage |
Temperature: -10 ~ 70 degrees C
Relative Humidity: 5 ~ 95% (non-condensing) |
|
| Ordering Information |
| GSD-1008HP |
8-Port 10/100/1000T 802.3at PoE + 2-Port 10/100/1000T Desktop Switch (120 watts) |
Download
Datasheet
| Date |
Version |
Description |
Download |
| 2017-11-24 |
1.0 |
GSD-1008HP |
 |
User's Manual
| Date |
Version |
Description |
Download |
| 2017-09-26 |
1.0 |
Initial Release |
|
|
|
| Ordering Information |
| GSD-1008HP |
8-Port 10/100/1000T 802.3at PoE + 2-Port 10/100/1000T Desktop Switch (120 watts) |
