WGSW-52040

48-Port 10/100/1000Base-T + 4-Port 1000X SFP Managed Gigabit Switch

 

Overview

Telecom-class Gigabit Solution for Enterprise Backbone and Data Center Networking
PLANET WGSW-52040 is a Layer 2 managed Gigabit Switch that provides high-density performance and supportsstatic Layer 3 routing. With 104Gbps switching fabric, the WGSW-52040 can handle extremely large amounts of data in a secure topology linking to an enterprise backbone or high capacity servers. The powerful WRR (Weighted Round Robin) and Network Security features make the WGSW-52040 perform effective data traffic control for ISP and Enterprise VoIP, video streaming and multicast applications.

Abundant IPv6 Support
The WGSW-52040 provides IPv6 management and enterprise level secure features such as SSH, ACL, WRRand RADIUS authentication besides support of the IPv4 protocol. The WGSW-52040 thus helps the enterprises to step in the IPv6 era with the lowest investment. In addition, you don’t need to replace the network facilities when the IPv6 FTTx edge network is built.

High Performance
The WGSW-52040 provides 48 10/100/1000Mbps Gigabit Ethernet ports with 4 Gigabit SFP slots. It boasts a high-performance switch architecture that is capable of providing non-blocking switch fabric and wire-speed throughput as high as 104Gbps, which greatly simplifies the tasks of upgrading the LAN for catering to increasing bandwidth demands.
 
Robust Layer 2 Features
The WGSW-52040 can be programmed for basic Switch management functions such as Port speed configuration, Port aggregation, VLAN, Spanning Tree protocol, WRR, bandwidth control and IGMP Snooping. The WGSW-52040 provides 802.1Q Tagged VLAN, Q-in-Q, voice VLAN and GVRP protocol. The VLAN groups allowed to be on the WGSW-52040 will be maximally up to 256. By supporting port aggregation, the WGSW-52040 allows the operation of a high-speed trunk combined with multiple ports. It enables up to 32 groups of maximum 8 ports for trunking.

Excellent Traffic Control
The WGSW-52040 is loaded with powerful traffic management and WRR features to enhance services offered by telecoms. The WRR functionalities include wire-speed Layer 4 traffic classifiers and bandwidth limiting which are particularly useful for multi-tenant unit, multi-business unit, Telco, or Network Service applications. It also empowers the enterprises to take full advantages of the limited network resources and guarantees the best performance at VoIP and Video conferencing transmission.

Powerful Security
The WGSW-52040 supports ACL policies comprehensively. The traffic can be classified by source/destination IP addresses, source/destination MAC addresses, IP protocols, TCP/UDP, IP precedence, time ranges and ToS. Moreover, various policies can be conducted to forward the traffic. The WGSW-52040 also provides IEEE 802.1x port based access authentication, which can be deployed with RADIUS, to ensure the port level security and block illegal users.

Efficient Management
The WGSW-52040 supports IP Stacking function that helps network managers to easily configure up to 24 switches in the same series via one single IP address instead of connecting and setting each unit one by one. For efficient management, the WGSW-52040 Managed Gigabit Switch is equipped with console, WEB and SNMP management interfaces. With its built-in Web-based management interface, the WGSW-52040 offers an easy-to-use, platform-independent management and configuration facility. The WGSW-52040 supports standard Simple Network Management Protocol (SNMP) and can be managed via any standard-based management software. For text-based management, the WGSW-520400 can be accessed via Telnet and the console port. Moreover, the WGSW-52040 offers secure remote management by supporting SSH connection which encrypts the packet content at each session.

Flexibility and Extension Solution
The four mini-GBIC slots built in the WGSW-52040 are compatible with 100/1000Base-X and WDM SFP (Small Factor Pluggable) fiber-optic modules. The distance can be extended from 550 meters (Multi-Mode fiber) up to above 10/50/70/120 kilometers (Single-Mode fiber or WDM fiber). It is well suited for applications within the enterprise data centers and distributions.
 
Ordering Information
WGSW-52040 48-Port 10/100/1000Base-T + 4-Port 1000X SFP Managed Gigabit Switch

Application

Server Farm Switch
The WGSW-52040 provides up to 52 Gigabit Ethernet ports for Enterprises and Network servers. It is ideal to be used as a server farm switch connecting to servers. With its port trunking function, an 8GB fat pipe is provided for connecting to the backbone if required.
 
 
Enterprise Security and QoS Edge Switch
With the IEEE 802.1x Network access authentication, the WGSW-52040 provides the MAC/IP/Protocol Access Control list and Port Security functions which can limit the number of MAC addresses to be passed through one specific port. The IGMP Snooping and QoS features in the WGSW-52040 improve the network efficiency and protect the network clients.
 
 
Ordering Information
WGSW-52040 48-Port 10/100/1000Base-T + 4-Port 1000X SFP Managed Gigabit Switch

Key Features

Physical Port
  • 48-Port 10/100/1000Base-T Gigabit Ethernet RJ-45
  • 4 100/1000Base-X mini-GBIC/SFP slots, SFP type auto detection
  • RJ-45 to DB9 console interface for Switch basic management and setup
IP Stacking
  • Connects with stack member via both Gigabit TP and SFP interfaces
  • Single IP address management, supports up to 24 units stacked together
  • Stacking architecture supports Chain and Ring mode
IP Routing Features
  • Supports maximum 128 static routes and route summarization
Layer 2 Features
    • Complies with the IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z Gigabit Ethernet standard
    • Supports Auto-negotiation and Half-Duplex / Full-Duplex modes for all 10Base-T/100Base-TX and 1000Base-T ports
    • Supports 100/1000Base-X for all SFP interfaces
    • Auto-MDI/MDI-X detection on each RJ-45 port
    • Prevents packet loss Flow Control
- IEEE 802.3x PAUSE Frame flow control for Full-Duplex mode- Back-Pressure Flow Control in Half-Duplex mode
    • High performance Store and Forward architecture, broadcast storm control, port loopback detect
    • 16K MAC address table, automatic source address learning and ageing
    • Supports VLAN
- IEEE 802.1Q Tag-based VLAN- GVRP for dynamic VLAN Management- Up to 256 VLANs groups, out of 4041 VLAN IDs- Provider Bridging (VLAN Q-in-Q) support (IEEE 802.1ad)- Private VLAN Edge (PVE) supported- GVRP protocol for Management VLAN- Protocol-based VLAN- MAC-based VLAN- IP Subnet VLAN
    • Supports Link Aggregation
- Maximum 32 trunk groups, up to 8 ports per trunk group- IEEE 802.3ad LACP (Link Aggregation Control Protocol)- Cisco ether-channel (Static Trunk)
    • Supports Spanning Tree Protocol
- STP, IEEE 802.1D (Classic Spanning Tree Protocol)- RSTP, IEEE 802.1w (Rapid Spanning Tree Protocol)- MSTP, IEEE 802.1s (Multiple Spanning Tree Protocol, spanning tree by VLAN)- Supports BPDU & root guard
  • Port Mirroring to monitor the incoming or outgoing traffic on a particular port (many to many)
  • Provides Port Mirror (many-to-1)
Quality of Service
    • 8 priority queues on all switch ports
    • Supports for strict priority and WRR (Weighted Round Robin) CoS policies
    • Traffic classification
- IEEE 802.1p CoS / ToS- IPv4 / IPv6 DSCP- Port-based WRR
  • Strict priority and WRR CoS policies
Multicast
  • Supports IGMP Snooping v1, v2 and v3, MLD v1 and v2 snooping
  • Querier mode support
  • Supports Multicast VLAN Register (MVR)
Security
  • IEEE 802.1x Port-based network access authentication
  • MAC-based network access authentication
  • Built-in RADIUS client to co-operate with the RADIUS servers for IPv4 and IPv6
  • TACACS+ login users access authentication
  • IP-based Access Control List (ACL)
  • MAC-based Access Control List
  • Supports DHCP Snooping
  • Supports ARP Inspection
  • IP Source Guard prevents IP spoofing attacks
Management
    • Switch Management Interface
- Console / Telnet Command Line Interface- Web switch management- SNMP v1, v2c, and v3 switch management- SSH/SSL secure access
  • BOOTP and DHCP for IP address assignment
  • Firmware upload / download via TFTP or HTTP protocol for IPv4 and IPv6
  • SNTP (Simple Network Time Protocol) for IPv4 and IPv6
  • User Privilege levels control
  • Syslog server for IPv4 and IPv6
  • Four RMON groups 1, 2, 3, 9 (history, statistics, alarms, and events)
  • Supports Ping, Trace route function for IPv4 and IPv6
  • Management IP for IPv4 and IPv6
 
Ordering Information
WGSW-52040 48-Port 10/100/1000Base-T + 4-Port 1000X SFP Managed Gigabit Switch

Specification

Hardware Specifications
Copper Ports 48 10/ 100/1000Base-T RJ-45 Auto-MDI/MDI-X ports
SFP / mini-GBIC Slots 4 100/1000Base-X SFP interfaces
Console 1 x RJ-45-to-RS-232 serial port(9600, 8, N, 1)
Switch Architecture Store-and-forward
Switch Fabric 104Gbps / non-blocking
Switch Throughput 77.38Mpps
Address Table 16K MAC address table with Auto learning function
Share Data Buffer 1.5Mbytes
Flow Control Back pressure for Half-Duplex
IEEE 802.3x Pause Frame for Full-Duplex
Jumbo Frame 16K bytes
LED System:
 PWR, SYS
Ports:
 TP Port:10/100/1000 Link/Act
 SFP Slot: Link/Act
Dimensions (W x D x H) 440 x 220 x 44 mm, 1U height
Weight 2825g
Power Consumption 55 watts / 187.6 BTU (maximum)
Power Requirements AC 100~240V, 50/60Hz
Management Function
System Configuration Console, Telnet, SSH, Web Browser, SNMP v1, v2c and v3
Management Supports both IPv4 and IPv6 addressing
Supports the user IP security inspection for IPv4 / IPv6 SNMP
Supports MIB and TRAP
Supports IPv4 / IPv6 FTP/TFTP
Supports IPv4 / IPv6 NTP
Supports RMOM 1, 2, 3, 9 four group
Supports the RADIUS authentication for IPv4 / IPv6 telnet user name and password
Supports IPv4 / IPv6 SSH
The right configuration for users to adopt radius server’s shell management
Supports CLI, Console, Telnet
Supports SNMPv1 / v2c / v3
Supports Security IP safety net management function: avoid unlawful landing at nonrestrictive area
Supports Syslog server for IPv4 and IPv6
Supports TACACS+
Layer3 Function
Static Route Supports maximum 128 static routes
Layer2 Function
Port Configuration Port disable/enable
Auto-negotiation 10/100/1000Mbps full and half duplex mode selection
Flow Control disable / enable
Bandwidth control on each port
Port Loopback detect
Port Status Display each port’s speed duplex mode, link status, flow control status, and
auto negotiation status
VLAN 802.1Q Tagged Based VLAN, up to 256 VLAN groups
Q-in-Q
GVRP for VLAN Management
Private VLAN Edge (PVE) supported
Protocol-based VLAN
MAC-based VLAN
IP Subnet VLAN
Bandwidth Control TX / RX / Both
Link Aggregation IEEE 802.3ad LACP / Static Trunk
Supports 32 groups of 8-Port trunk
QoS 8 priority queues on all switch ports
Supports strict priority and Weighted Round Robin (WRR) CoS policies
Traffic classification:
 ■ IEEE 802.1p CoS / ToS
 ■ IPv4 / IPv6 DSCP
 ■ Port-based WRR
Multicast IGMP v1/ v2 / v3 Snooping
Querier mode support
MLDv1 / v2, MLD v1 / v2 Snooping
Querier mode support
Multicast VLAN Register (MVR)
Access Control List Supports Standard and Expanded ACL
IP-based ACL / MAC-based ACL
Time-based ACL
Up to 512 entries
Bandwidth Control At least 64Kbps step
Security Supports MAC + port binding
IPv4 / IPv6 + MAC + port binding
IPv4 / IPv6 + port binding
Supports MAC filter
ARP Scanning Prevention
Authentication IEEE 802.1x port-based network access control
AAA Authentication: TACACS+ and IPv4/IPv6 over RADIUS
SNMP MIBs RFC-1213 MIB-II
RFC-1215 Internet Engineering Task Force
RFC-1271 RMON
RFC-1354 IP-Forwarding MIB
RFC-1493 Bridge MIB
RFC-1643 Ether-like MIB
RFC -1907 SNMP v2
RFC-2011 IP/ICMP MIB
RFC-2012 TCP MIB
RFC-2013 UDP MIB
RFC-2096 IP forward MIB
RFC-2233 if MIB
RFC-2452 TCP6 MIB
RFC-2454 UDP6 MIB
RFC-2465 IPv6 MIB
RFC-2466 ICMP6 MIB
RFC-2573 SNMPV3 notify
RFC-2574 SNMPV3 vacm
RFC-2674 Bridge MIB Extensions (IEEE 802.1Q MIB)
RFC-2674 Bridge MIB Extensions (IEEE 802.1P MIB)
Standard Conformance
Regulation Compliance FCC Part 15 Class A, CE
Standards Compliance IEEE 802.3 10Base-T
IEEE 802.3u 100Base-TX
IEEE 802.3z Gigabit SX/LX
IEEE 802.3ab Gigabit 1000T
IEEE 802.3x Flow Control and Back pressure
IEEE 802.3ad Port trunk with LACP
IEEE 802.1D Spanning tree protocol
IEEE 802.1w Rapid spanning tree protocol
IEEE 802.1s Multiple spanning tree protocol
IEEE 802.1p Class of service
IEEE 802.1Q VLAN Tagging
IEEE 802.1x Port Authentication Network Control
Environment
Operating
Temperature: 0 ~ 50 degrees C
Relative Humidity: 5 ~ 95 % (non-condensing)
Storage
Temperature: -10 ~ 70 degrees C
Relative Humidity: 5 ~ 95 % (non-condensing)
Ordering Information
WGSW-52040 48-Port 10/100/1000Base-T + 4-Port 1000X SFP Managed Gigabit Switch

Download

Datasheet

Date Version Description Download
2013-08-16 1.0 WGSW-52040

Quick Guide

Date Version Description Download
2013-07-12 1.0 Initial release.

User's Manual

Date Version Description Download
2013-07-12 1.0 Initial release for Command Guide.
2013-07-12 1.0 Initial release for Configuration Guide.
Ordering Information
WGSW-52040 48-Port 10/100/1000Base-T + 4-Port 1000X SFP Managed Gigabit Switch